CABLE LAYING & CABLE SLEEVE INSTALLATION

Draka Communications – part of Draka Holding N.V. situated in Amsterdam – offers a variety of reliable products in copper and fibre optic technology for data transmission and telecommunication. They have long-term experience and knowledge in the cable and fibre business ensuring their major market position today. Draka Communications can be found in more than 32 countries in Europe, Asia, North and South America. #cables #cablelaying
more
7 Pins
·4y
a train track with rocks and gravel on the bottom, and one rail running parallel to each other
Installation of Rail Foot Cables
Installation of Rail Foot Cables | Cable Laying & Cable Sleeve Installation Lay the cable down outside the area of the tracks and align it. When doing so the cable must not be unwound over the flange of the delivery drum. In that case loops will occur which cannot be compensated during the lay. Lay the cable along the external side of the rail foot. When installing the cable, ensure that there is a reserve length of approximately 5 metre on each side. #cables #cableinstallation
a close up of a bike's handlebars and the end of it
Installation of Cable Sleeves | Jointing & Splicing Cables
INSTALLATION OF CABLE SLEEVES The pulled in cables are not always long enough to join together two connection points without interruption. Sometimes the position and type of laying run require the use of separate lengths of cable. #cables
four different images of various wires on the ground
Cable Pulling | Safe Pulling of Cables Using Manual Laying
Cable Pulling | Safe Pulling of Cables Using Manual Laying | LV MV HV For manual pulling in of the cable one thing that must be ensured is that the cable is on no account pulled over the flange of the cable drum. #cables
two men working on pipes in the dirt
Cable Pulling | Safe Pulling of Cables Using Motorised Pullers
Cable Pulling | Safe Pulling of Cables Using Motorised Pullers In most cases the cable is pulled with motorised assistance. During this procedure, forces of tension result, which, depending on the type of LV MV HV cable to be pulled, can reach double kN figures. Particular attention must therefore be paid to work safety.
two pictures side by side, one with an orange object on it
How to Prepare Cables To Avoid Cable Damages & Faults
A careful preparation of cable, cable drum and run can avoid a number of potential reasons for damages and faults. Low & High Voltage Cables Cables to be laid outdoors are usually delivered on large wooden or steel drums. Manual laying of cables is not possible due to the excessive weight. #cables
several spools of black electrical wire on the ground
Cable Drums | Recommended Transport & Storage
Even if cable and cable drum look very strong, there are certain rules to follow to avoid damage of the cable and an accompanying impairment of mechanical and electrical characteristics for LV MV HV cables. Transport & Storage of Cable Drums It is possible to store cable drums outdoors. When storage has occurred in heated rooms, a minimum 24-hour acclimatisation period must be observed before installation (possible condensation build-up in the cable!).
several black wires are laying on the ground
Cable Laying | The Importance of Cable Installation Instructions
Usually the only people who take any notice of cables and wires are those who work with them. Most of us use the telephone, watch television or surf the Internet without thinking about how the underlying infrastructure, the network of cables, has been assembled. Cables are rarely heeded; they are ‘simply there’. #cables