The Family Handyman - Screws DIY Tip of the Day. Use this quick and simple way to get a screw started in a hard-to-reach place. Just poke the screw through a piece of masking tape with the sticky side of the tape toward the head. Place the screwdriver in the slot, then fold the tape up onto the screwdriver. Once the screw is well started, pull the screwdriver loose and remove the tape.
Starlight | Alexey Kljatov | As fascinating as macro photography is, most of us think we can’t do it because it requires specialized equipment. Alexey, however, is an inspiration to aspiring amateur photographers everywhere -he created a home-made rig capable of capturing stunning close-up pictures of snowflakes out of old camera parts, boards, screws and tape. His pictures give us an enchanting close-up view of snowflakes that we could never hope for without specialized equipment.
print. tape Stencil on guitar. Drill holes along stencil. Remove paper. Jig saw to open top about 1/3rd down the side. inside, remove all splinters from design holes by rubbing a knife blade back n forth. Cut to fit a piece of plywood for shelf. Clean up design holes using a chain saw blade sharpener so light can shine through better. Cut hole in back near neck of guitar large enough for Christmas light plug to fit through.