Wasp and Hornet Killer High Dielectric Strength (41,000 Volts). Intended for outdoor use to destroy nests in telephone poles, trees, bushes, chimneys, cracks, crevices, attics, warehouses, and other areas where food items are not exposed.FEATURES:  Kills Wasps, Hornets, Yellow Jackets and Bees on Contact Jet Stream Sprays up to 20 feet Instant Knockdown of Wasps, Hornets, Yellow Jackets, & Bees EPA Registered 20 oz. Aerosol Net Weight 13 oz. 12 per caseONLY $87/CASE

Wasp and Hornet Killer High Dielectric Strength (41,000 Volts). Intended for outdoor use to destroy nests in telephone poles, trees, bushes, chimneys, cracks, crevices, attics, warehouses, and other areas where food items are not exposed.FEATURES: Kills Wasps, Hornets, Yellow Jackets and Bees on Contact Jet Stream Sprays up to 20 feet Instant Knockdown of Wasps, Hornets, Yellow Jackets, & Bees EPA Registered 20 oz. Aerosol Net Weight 13 oz. 12 per caseONLY $87/CASE

Teflon wire is suitable for applications that include high radio or microwave frequencies because of their good dielectric strength.

Teflon wire is suitable for applications that include high radio or microwave frequencies because of their good dielectric strength.

What is Anodising?  Anodising is used to increase surface hardness, wear resistance and dielectric strength of metals such as Aluminium, Titanium and Magnesium. Anodising can also provide a good base for painting or colouring, creating an extremely stable but porous oxide layer on the surface of the metal.And there you were thinking it was a decorative finish! Read more...

What is Anodising? Anodising is used to increase surface hardness, wear resistance and dielectric strength of metals such as Aluminium, Titanium and Magnesium. Anodising can also provide a good base for painting or colouring, creating an extremely stable but porous oxide layer on the surface of the metal.And there you were thinking it was a decorative finish! Read more...

3/16 Clear 2:1 Shrink Ratio Heat Shrink - 10' Section by THERMOSLEEVE. $4.75. Specifications: Material Type: Thin Wall Cross-Linked Polyolefin Shrink Ratio: 2:1    Shrink Temperature: 120°C Operating Temperature: -55°C to 110°C Tensile Strength: 2200 PSI UL Recognized Dielectric Strength: 600 Volts per mil Fluid Resistance: Good to Excellent Copper Corrosion: No Corrosion Water Absorption: 0.2% Flammability: Flame Retardant Resistant to common fluids and s...

3/16 Clear 2:1 Shrink Ratio Heat Shrink - 10' Section by THERMOSLEEVE. $4.75. Specifications: Material Type: Thin Wall Cross-Linked Polyolefin Shrink Ratio: 2:1 Shrink Temperature: 120°C Operating Temperature: -55°C to 110°C Tensile Strength: 2200 PSI UL Recognized Dielectric Strength: 600 Volts per mil Fluid Resistance: Good to Excellent Copper Corrosion: No Corrosion Water Absorption: 0.2% Flammability: Flame Retardant Resistant to common fluids and s...

pin 1
KUSAM MECO -TD SERIES POWER FACTOR TRANSDUCER - Total Automation Dual Aux. Power 110/220V AC High Accuracy 0.2% RO at 23oC± 5oC High Dielectric Strength 2.6KV AC/Min, Between Input / Output/ Power Case ABS Plastic Case, DIN Rail or Wall Mounting

KUSAM MECO -TD SERIES POWER FACTOR TRANSDUCER - Total Automation Dual Aux. Power 110/220V AC High Accuracy 0.2% RO at 23oC± 5oC High Dielectric Strength 2.6KV AC/Min, Between Input / Output/ Power Case ABS Plastic Case, DIN Rail or Wall Mounting

Kusam Meco- TD SERIES AC VOLTAGE TRANSDUCER - Total Automation Dual Aux. Power 110/220V AC High Accuracy 0.2% RO at 23oC± 5oC High Dielectric Strength 2.6KV AC / Min, Between Input / Output/ Power Case ABS Plastic Case, DIN Rail or Wall Mounting

Kusam Meco- TD SERIES AC VOLTAGE TRANSDUCER - Total Automation Dual Aux. Power 110/220V AC High Accuracy 0.2% RO at 23oC± 5oC High Dielectric Strength 2.6KV AC / Min, Between Input / Output/ Power Case ABS Plastic Case, DIN Rail or Wall Mounting

Dia. 3.0mm x 60mm(L) Dielectric Strength Member Fusion Splice Sleeve - Pack of 25 - Clear Color

Dia. 3.0mm x 60mm(L) Dielectric Strength Member Fusion Splice Sleeve - Pack of 25 - Clear Color

Dia. 3.0mm x 40mm(L) Dielectric Strength Member Fusion Splice Sleeve - Pack of 25 - Clear Color

Dia. 3.0mm x 40mm(L) Dielectric Strength Member Fusion Splice Sleeve - Pack of 25 - Clear Color

NTE 54-054 SPST Lighted Rocker Switch Red Neon lamp by NTE. $7.29. Current Rating:  15A 125VAC, 10A 250VAC, 3/4 HP 125-250VAC Lamp Voltage: 125V Neon Insulation Resistance: 100 Megohms (min.) Dielectric Strength: 1000V RMS (min.) Temperature Rating: +32° to +185°F (0° to +85°C) Electrical Life:  100,000 cycles Mechanical Life:  100,000 cycles Terminal Type: .250" Tab Q.C. Mounting Hole: 1.125 (28.57) x .550 (13.97)

NTE 54-054 SPST Lighted Rocker Switch Red Neon lamp by NTE. $7.29. Current Rating: 15A 125VAC, 10A 250VAC, 3/4 HP 125-250VAC Lamp Voltage: 125V Neon Insulation Resistance: 100 Megohms (min.) Dielectric Strength: 1000V RMS (min.) Temperature Rating: +32° to +185°F (0° to +85°C) Electrical Life: 100,000 cycles Mechanical Life: 100,000 cycles Terminal Type: .250" Tab Q.C. Mounting Hole: 1.125 (28.57) x .550 (13.97)

3/8 Clear 2:1 Shrink Ratio Heat Shrink - 10' Section by THERMOSLEEVE. $5.00. Specifications: Material Type: Thin Wall Cross-Linked Polyolefin Shrink Ratio: 2:1    Shrink Temperature: 120°C Operating Temperature: -55°C to 110°C Tensile Strength: 2200 PSI UL Recognized Dielectric Strength: 600 Volts per mil Fluid Resistance: Good to Excellent Copper Corrosion: No Corrosion Water Absorption: 0.2% Flammability: Flame Retardant Resistant to common fluids and solvents Meets...

3/8 Clear 2:1 Shrink Ratio Heat Shrink - 10' Section by THERMOSLEEVE. $5.00. Specifications: Material Type: Thin Wall Cross-Linked Polyolefin Shrink Ratio: 2:1 Shrink Temperature: 120°C Operating Temperature: -55°C to 110°C Tensile Strength: 2200 PSI UL Recognized Dielectric Strength: 600 Volts per mil Fluid Resistance: Good to Excellent Copper Corrosion: No Corrosion Water Absorption: 0.2% Flammability: Flame Retardant Resistant to common fluids and solvents Meets...

pin 1
Pinterest • The world’s catalogue of ideas
Search