Hawkeye PVC Bow and Arrows Here is what you will need: 3/4 inch PVC Pipe (4 feet) 3/4 inch PVC Cross Connector PVC cement/primer Combo 4 1/2-5 feet braided nylon string Black Gorilla or duct tape 3/8 Oak Dowels (one makes two arrows) 5/8 Rubber Chair Tips (one per arrow) Hot glue or 2 inch squares of felt (two per arrow) **Optional Black Spray Paint**
1-inch PVC pipe. It's 36 inches high (excepting the peaked part, which adds another 2 and 1/2 feet, roughly), and the footprint is 8 ft X 12 ft. The "Tuftex" plastic panels are 26 inches X 8 ft, so that's what decided on the width.
Home made flag pole stand. Great for Cub Scouts. Easy to make. 2x6x8 piece of wood and a 12 inch piece of 1 1/4 PVC pipe used as pole holder. Cut each piece 12 inches long. Sand and paint. Use 3 inch screws to hold together. Takes longer for paint to dry then it does to make flag stand. Wolf elective practice Flag Ceremony at every Den Meeting.
I drilled 2.5" holes between all the sections, and added PVC tubing to protect to wood from nibbly hamsters. The top section had no ventilation, so I made the front surface out of hardware cloth. The bottom two floors (and an inch of the top) is clear plexiglass.