Products

16 Pins

5mo

DIVIDE&RULE

a wooden ruler sitting on top of a wooden table next to a white wall and floor

Circle Tool & Rule 5-200Ø

The Circle Tool & Rule 5-200Ø is a combination circle drawing tool and ruler. Able to draw circles from 5mm to 200mm diameter at 5mm increments. The centre point has a small brass pin with horizontal and vertical guide lines for easy locating in place. The two sides have 100mm rules with incremental millimetre marks to both long edges allowing for the rule to be used to measure from the left or right. The back of the long edge of the rule has a bevel to minimise ink smudging.

the rulers are lined up and ready to be cut into pieces with holes in them

Divide And Rule

Journals And Notebooks

Journal Rules

Journals and notebooks come in a huge range of shapes and sizes. The journal rule collection is a set of rules that vary in size in 20mm increments to allow the customer to choose the best combination of sizes to match their preferred notebook. The rules all have incremental millimetre markings and dimension from each corner including the ends of the rules. To one edge there are dimensions starting from each end. The other edge has centreline dimensioning with zero starting in the middle. The zero point is also where the magnet is fitted that allows for multiple Journal Rules to link together for easy carrying. This magnet will also hold the pocket clip on various pens and mechanical pencils.

a wall mounted clock with three different types of clocks on it

Geometry Set

This is DIVIDE&RULES take on the classic geometry set. Including the Protractor 180°, the Square 60/30/90°, the Square 45/45/90°, the Rule 300mm, the 7 Item Display Stand and bundled with the Square 30/40/50mm and a Measuring Wheel 100mm. Made in the UK

a close up of a metal object on a white surface with a blue back ground

Simple Way

Design

7 Item Display Stand

The 7 Item Display Stand is a simple way to keep all your rules, protractors and set squares within easy reach. A simple slot together design for easy toolless assembly. The 7 Item Display Stand is able to hold any combination of our rules, protractors and the Square 30/60/90° and the Square 45/45/90° 87 x 82 x 26mm (when assembled) Made in the UK

a close up of a circular wooden ruler on a pink background with space for writing

Round Corner

Radii Set

The Radii set is a collection of incrementally increasing radii for rounding corners. Starting at 5mm and increasing at 5mm steps to each subsequent corner up to 60mm. The 3 pieces fit inside each other and allow for a number of the radii to be marked with either an internal or external curve depending upon requirements. All pieces include 10 degree marks on the inside and outside edges and the first piece also includes centre hole cutouts for all the different radii. 115 x 105 x 3mm Made in the UK

The Centreline Rule 210mm is designed with zero placed at the centre of the rule and the dimensions going outwards to both sides. This allows for easy symmetrical drawing or calligraphy work. The rule is 10mm wide to each end with corresponding millimetre markings for creating parallel lines.

The centre of the rule there is a small tab with a chamfer to make lifting the rule without disturbing the surrounding work simple.

The Centreline Rule 210mm is designed to complement an A4 page or notebook.

210 x 15 x 3mm

Made in the UK Symmetrical Drawing, Parallel Lines, Both Sides, Siding, Calligraphy, Notebook

Centreline Rule 210mm

The Centreline Rule 210mm is designed with zero placed at the centre of the rule and the dimensions going outwards to both sides. This allows for easy symmetrical drawing or calligraphy work. The rule is 10mm wide to each end with corresponding millimetre markings for creating parallel lines. The centre of the rule there is a small tab with a chamfer to make lifting the rule without disturbing the surrounding work simple. The Centreline Rule 210mm is designed to complement an A4 page or notebook. 210 x 15 x 3mm Made in the UK

Centreline Rule 150mm

The Centreline Rule 150mm is designed with zero placed at the centre of the rule and the dimensions going outwards to both sides. This allows for easy symmetrical drawing or calligraphy work. The rule is 10mm wide to each end with corresponding millimetre markings for creating parallel lines. The centre of the rule there is a small tab with a chamfer to make lifting the rule without disturbing the surrounding work simple. The Centreline Rule 210 is designed to complement an A5 page or notebook. 150 x 15 x 3mm Made in the UK

a tape measure is shown against a pink background

Dovetail Rule 200/350mm

The Dovetail Rule 200/350mm is a two-piece ruler and square. The two pieces can be used individually as 200mm rules and allow for easy transportation in a pencil case. When the two pieces are combined a total length of 350mm can be created. The two pieces can be combined either way around to allow for the zero point to be to the left or right. The two sections can also be combined at 90 degrees to act as a reference square with a starting corner of zero for both edges. Please note that due to the joint tolerances the square will not be as accurate as our dedicated 30/60/90, 45/45/90 or 30/40/50mm Squares. 350/200 x 25 x 3mm Made in the UK

The Rule 150mm has incremental millimetre marks to both long edges allowing for the rule to be used to measure from the left or right.

The rule also includes a 30mm end face with millimetre increments.

The opposite end has two arcs that allow the rule to align with the edge circumference of either the Protractor 360 or Protractor 180. The two arcs allow the ruler to be positioned to either the left or right side of the preferred edge to be marked and aligns to the Protractor centre point allowing for accurate angled lines to be produced. The Rule also includes central dimensions that are from the two arcs end and allow for measurements from the edge or the protractor outwards.

152 x 30 x 3mm

Made in the UK Right Side, The Edge

Right Side

The Edge

Rule 150mm

The Rule 150mm has incremental millimetre marks to both long edges allowing for the rule to be used to measure from the left or right. The rule also includes a 30mm end face with millimetre increments. The opposite end has two arcs that allow the rule to align with the edge circumference of either the Protractor 360 or Protractor 180. The two arcs allow the ruler to be positioned to either the left or right side of the preferred edge to be marked and aligns to the Protractor centre point allowing for accurate angled lines to be produced. The Rule also includes central dimensions that are from the two arcs end and allow for measurements from the edge or the protractor outwards. 152 x 30 x 3mm Made in the UK

Rule 300mm

The Rule 300 has incremental millimetre marks to both long edges allowing for the rule to be used to measure from the left or right. The rule also includes a 30mm end face with millimetre increments. . The opposite end has two arcs that allow the rule to align with the edge circumference of either the Protractor 360 or 180. The two arcs allow the ruler to be positioned to either the left or right side of the preferred edge to be marked and aligns to the Protractor centre point allowing for accurate angled lines to be produced. The Rule also includes central dimensions that are from the two arcs end and allow for measurements from the edge or the protractor outwards. 302 x 30 x 3mm Made in the UK

Related searches

Square 30/40/50mm

The Square 30/40/50mm is a pocket product that uses the classic Pythagorean 3/4/5 triangle. Handy for quick right-angle checks. Due to the 3/4/5 triangle not having round numbers for either angle except the 90-degree corner these have not been included on the product. 40 x 30 x 3mm Made in the UK

a triangle shaped wooden ruler sitting on top of a table

Back Edges

Reading

Square 45/45/90°

The 45/45/90° Square provides dimensions from every corner and with full millimetre distances for each side (which are noted on the Square). To ease the reading of dimensions there are etched surface arc's link the dimensions and include a mini reference arrow that indicates which shared corner the dimension starts from. 145 x 145 x 3mm Made in the UK

a wooden triangle with numbers and lines on it

Square 60/30/90°

The 60/30/90° Square provides dimensions from every corner and with full millimetre distances for each side (which are noted on the Square). To ease the reading of dimensions there are etched surface arc's link the dimensions and include a mini reference arrow that indicates which shared corner the dimension starts from. 225 x 130 x 3mm Made in the UK

a close up of a metal object on a pink background

Measure Wheel 100mm

The Measure Wheel 100mm is a pocket alternative to a tape measure. Simply grip the measure wheel with two fingers on either side of the brass axle, align the 0 marker with your start point and then roll the wheel along any surface you wish to measure. As you complete each 100mm revolution there is a discernible bump and when you reach your end point simply refer to the markings on the side of the wheel to calculate your total distance. 32 x 32 x 7mm Made in the UK.

Center Point

Drawing Techniques

Line Drawing

Protractor 360°

A 360-degree protractor that also has a 360mm circumference, so each degree mark is also a millimetre. The centre point is cutout for accuracy. Can be combined with either the Rule 300 or Rule 150 for easy angled line drawing. 115 x 115 x 3mm